The Cross- and Longitudinal Foil Cutter RollCut-Master RF makes your foil cutting flexible!
Operating modes:
Cross cutting
Cross and longitudinal
cutting simultaneously
Lengthwise cutting
with rewinding
Cross and Longitudinal Foil Cutter – Josting RollCut-Master RF
Flexibility for your your foil cutting:
- Cross- and Longitudinal Foil Cutter RollCut-Master RF allows cutting across the running direction with top and bottom knife.
- Longitudinal cutting by pneumatic roller cutters on a glasshard drum.
- Roll suspension frame to carry rolls of max. 650 mm outer diameter and 500 kg weight, equipped with an pneumatic winding shaft for 76 mm * inner diameter, 2 tilting bearings, and a pneumatic brake.
- Optimum cutting performance for creating sheets thanks to continuously adjustable speed of feed up to 52 m/min, high cut-to-length accuracy thanks to frequency controlled drive for the feed with adjustable acceleration and deceleration, reselection of lengths and number of pieces at electronic counters.
- Collecting table for max. length of cut up to 2.000 mm*, adjustable in height and angle.
- Ionizing bars of the cross- and Longitudinal Foil Cutter RollCut-Master RF for the prevention of electrostatic charging.
- Rewinding unit with 2 pneumatic clamping shafts for 76 mm* inner diameter and max. 350 mm outer diameter, driven by a rotary current motor with constant speed, control of the web tension by means of the brake at the roll suspension frame and final switch off by length counter with preset.
* Other dimensions available upon request.
TOP VIDEO
IMPORTANT FEATURES AT A GLANCE
Lenghtwise cutting
Longitudinal cutting by pneumatic roller cutters.
Cross cutting
Optimum cutting performance for creating sheets.
Simultaneously cutting
Cross and longitudinal cutting simultaneously with rewinding.
Hydraulic settings
Adjustment of the pneumatic roller cutters.
TECHNICAL DATA
RollCut-Master RF 1500
| Type | Cross- and Longitudinal Foil Cutter RollCut-Master RF 1500 |
| Max. width of roll | 1460 mm |
| Max. unwinding diameter | approx. 650 mm |
| Max. rewinding diameter | approx. 350 mm |
| Clamping shafts for tubes | 150 or 76 mm |
| Length of cut | 0 – 9999 mm |
| Number of pieces | 0 – 99999 |
| Adjustable speed of feed | |
| Number of cut pieces of 1 m length | 1765 pieces per hour |
| Electric connection | 400 V. 16 A |
| Compressed air connection | 6 bar |
| Floor space (without depositing table) | 230 x 200 cm |
| Height | 198 cm |
| Net weight | ????? kg |
Specifications subject to alterations.
RollCut-Master RF 1800
| Type | Cross- and Longitudinal Foil Cutter RollCut-Master RF 1800 |
| Max. width of roll | 1810 mm |
| Max. unwinding diameter | approx. 650 mm |
| Max. rewinding diameter | approx. 350 mm |
| Clamping shafts for tubes | 150 or 76 mm |
| Length of cut | 0 – 9999 mm |
| Number of pieces | 0 – 99999 |
| Adjustable speed of feed | |
| Number of cut pieces of 1 m length | 1765 pieces per hour |
| Electric connection | 400 V. 16 A |
| Compressed air connection | 6 bar |
| Floor space (without depositing table) | 260 x 200 cm |
| Height | 198 cm |
| Net weight | ????? kg |
Specifications subject to alterations.
RollCut-Master RF 2200
| Type | Cross- and Longitudinal Foil Cutter RollCut-Master RF 2200 |
| Max. width of roll | 2160 mm |
| Max. unwinding diameter | approx. 650 mm |
| Max. rewinding diameter | approx. 350 mm |
| Clamping shafts for tubes | 150 or 76 mm |
| Length of cut | 0 – 9999 mm |
| Number of pieces | 0 – 99999 |
| Adjustable speed of feed | |
| Number of cut pieces of 1 m length | 1765 pieces per hour |
| Electric connection | 400 V. 16 A |
| Compressed air connection | 6 bar |
| Floor space (without depositing table) | 300 x 200 cm |
| Height | 198 cm |
| Net weight | ????? kg |
Specifications subject to alterations.