Cut foil and paper and wind up again neat and clean.

The Foil Slitter RollCut-Master R from Josting is for the exact and neat slitting of foil, film and paper rolls. From one wide roll you can make several narrow rolls by rewinding and slitting. The RollCut-Master R shines with his compact design: The braked pay-off shaft is located in the lower part and the two power-driven winding shafts in the upper part.

A pneumatically regulated brake which is fitted to the unwinding shaft takes care of constant web tension during the complete winding process. The brake will automatically be regulated by an ultrasonic sensor for the reel diameter. Web guide rollers ensure a steady flow of the foil and a straight-edged rewinding.

Slitting is performed either by swivelling roller cutters acting on a glasshard drum or by cutter blades, depending on the material.

The operating speed is infinitely variable and can be set at the geared motor. Tilting bearings and pneumatic clamping of the winding shafts make for easy handling and short setup times. Length selection by electro-mechanical meter counter is possible. Electrostatic charging of the foils and films is eliminated by two ionizing bars.